Change a Propane Tank
Propane powered forklifts are frequently utilized inside warehouses. The forklift is designed with the propane tank mounted at the back of the driver. The tanks, which look a lot like beer kegs, need to be replaced every so often because they have a limited lifespan. Forklift drivers must utilize care when handling propane tanks. Compressed gases are really dangerous, particularly because the gas is flammable. Use caution when replacing and removing propane tank to prevent injury.
1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The forklift must be left on until the engine dies. This process burns off the gas in the transfer hose which connects the tank and the engine. Prior to taking the second steps, wear the proper safety equipment, such as insulated gloves made of either neoprene or leather. It is important for you to protect your skin from touching the compressed gas, which is very cold.
2 The hose of the tank needs to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.
3 You could inspect for leaks by applying soapy water to the valve and opening it slightly. Leaking gas will cause bubbles to froth around the value. If this happens, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the valve area, and then perform the leak checking procedure once more. Persistent leaks mean that the nut and connecting hose should be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Lastly, open the valve all the way to allow the gas to fill the connecting hose. After that you can start the forklift and resume working.