Tower Crane Rentals and Sales Bakersfield - Cranes are a globally recognized form of industrial equipment that is commonly used in the materials handling industry. Depending on the application, cranes may have wire ropes, sheaves, chains or a hoist rope. These components enable cranes to lift and lower items vertically as well as transporting items horizontally. Heavy crates, shipping containers, machinery and similar items can be efficiently moved thanks to a variety of crane models.
Freight Transportation
Cranes simplify loading and unloading and moving items. The lifting capacity depends on the model. They provide a huge mechanical advantage and enable people to lift thousands of pounds of freight. Cranes are found in many industries and often seen on construction sites.
Specified Use
Jib cranes can be tiny and are suited for cramped and smaller environments including workshops while giant tower cranes can be employed to construct high-rises. There is the right crane model available for numerous applications. Some cranes can allow access to tight spaces. Floating cranes can be useful for salvaging sunken ships and other marine items. They may also be used on oil rigs.
Tower Cranes
This type of crane is fixed on a concrete slab to the ground. This model is commonly attached to the sides of structures. It offers precise height and lifting reliability. Commonly used for building residential and commercial tall buildings, the base is attached to the mast which may extend for further reach. The slewing unit of the crane and it’s connected mast allow rotation of the crane. Above the slewing component, the operator cab is situated, along with the long horizontal jib and the counter jib.
The majority of the load is carried via the long horizontal jib. The counter-jib creates the counterweight and it may rely on concrete blocks. The jib handles the load to and from the center of the crane. Normally the crane operator stays inside of a cab found on top of the tower attached to the turntable; although, it may be mounted on the jib instead. There is a radio remote control feature that operators can access from the ground. The operator relies on electric motors to control wire rope cables in a system of sheaves and control the lifting hook. The cargo hook, along with its motor is found in the long horizontal arm. The operator commonly works together with a rigger to safely hook and unhook loads. Hand signals are a huge safety component used daily. The rigger has an important job dictating the crane’s lifting schedule. They are responsible for making sure all rigging is reliable and safe.
Truck-Mounted Cranes
The boom and the carrier are two parts found on truck-mounted cranes. The carrier and the boom have an attached turntable to enable the upper component to swing from side to side. Typically, modern hydraulic truck cranes feature single engines. The engine supplies power to both the undercarriage and the crane. Hydraulics are responsible for providing power to the upper via the turntable from the pump mounted on the lower portion. Earlier hydraulic crane trucks commonly had two engines. One engine allowed the crane to be pulled down the road while the other engine controlled the hydraulic pump for the jacks and outriggers. Some operators prefer the older dual-engine models since there are often turntable leaks many newer units.
Cranes commonly have to travel via roads to get to different jobs. This can eliminate industrial transportation requirements unless the crane is sizeable with certain weight restrictions. Local transportation laws are in place. Larger machines may have trailers to distribute the load over a variety of axles. Certain cranes can be taken apart to meet certain requirements. A crane will often be followed by another truck containing the counterweights that are disassembled for travel.
Outriggers & Stability
Outriggers are extended horizontally from the chassis of the crane. The outriggers help to vertically stabilize the machine and keep it level during stationary and hoisting jobs. Certain truck crane models have the capacity to travel slowly while maintaining a suspended load. Extra care is taken to make sure the load does not swing side to side from the travel direction. The majority of the anti-tipping aspect is related to the stiffness of the chassis suspension. Many models include moving counterweights to be adjusted to enhance stabilization farther than what the outriggers provide. Suspended loads are among the most stable due to the majority of the crane’s weight acting as a counterweight. There are electronic safeguards in place to regulate the maximum safe loads for traveling speeds and stationary work.
Overhead and Bridge Cranes
An overhead crane is a kind of crane commonly called a bridge crane. This mechanism features a crane with a hook-and-line mechanism and horizontal beam that is designed to run along rails that are spaced widely. These cranes are similar to gantry cranes that are typically found in factory buildings. They attach to rails which run alongside two walls. Cranes can be made with single or double beam construction and may rely on complex box girders or regular steel beams. A control pendant may be used to operate the crane. A double girder bridge can be used in places that require heavy lifting such as 10 tons or more. The box girder style produces a system with a lower deadweight but offers higher system integrity. Cargo can be lifted with a hoist and the trolley that can travel along the bridge along with the bridge component covered by the crane.
The manufacturing process of the steel industry utilizes cranes frequently. An overhead crane typically handles steel until it exits the factory as a completed item. All steel is handled by an overhead crane from raw materials being poured to storing hot steel for cooling and transporting finished coils. Steel items are moved onto trucks via overhead cranes. Metal fabricators and stampers and the automobile industry rely on these machines.
Pulp & Paper Mills
Pulp mill maintenance commonly relies on bridge cranes. They are responsible for removing items including heavy press rolls. Bridge cranes utilized in paper machine construction help to install large apparatus’ and equipment including huge components such as cast-iron paper drying drums and similar items.
Loader Crane
Electrically powered with an articulated arm attached to a trailer or a truck and specified for unloading and loading, the loader crane consists of many jointed components that enable the machine to be folded into a small space between uses. Telescoping sections are popular. There are models that have the ability to stow or load themselves without any operator instruction. To complete viewing access of the load, the operator must move around the vehicle. Hydraulic controls that are mounted on the crane may work with a portable cabled control system and a radio-linked system.
Gantry Crane
There is a hoist on the gantry crane found in a fixed machinery house or a horizontal trolley that runs along rails often fitted between two beams or a single beam. The crane frame is supported via beams and wheels on a gantry system and runs on the gantry rail which is generally perpendicular to the trolley direction of travel. The gantry cranes are available in numerous sizes. Some models can move extremely heavy loads for industrial and shipyard applications.
Tower Cranes PDF
