Most of the time, companies will spend a lot of money to purchase their forklifts. It is important, therefore to take proper care of your machine to protect your investment into the long run. It is really a great idea to know the procedures which are undertaken in taking care of and maintaining this equipment.
Amongst the best ways to tell how good the engine is running is by starting the lift truck up and listening closely to see how it runs. Like for instance, if there are any knocks or misses, the equipment is faulty and this should raise several concerns. Furthermore listen closely for any squealing sounds which come from the belts because these sounds will provide you with a lot of information.
When doing maintenance, some of the main components you would have to pay attention to comprise the horn, safety warning devices, the lights, the gauges and the overhead guard. Any faulty parts or burnt out light bulbs must be replaced as soon as they are noticed. It is also vital to check the wiring.
When the above parts have been inspected thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Each battery cell should be inspected so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and after that change the filters. The fuel filters, hydraulic filter and the transmission filter must be frequently replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
After the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make sure to apply some grease. Inspect the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Next, inspect each and every other part of the machinery including the wheels. If any kind of fault or concern is detected, be certain to deal with it immediately in order to make certain the equipment is running at its safest and optimum levels.